Apoxie® Clay

Size: 1 Pound

Apoxie® Clay is a permanent, self-hardening, waterproof clay product most commonly used when the shiny finish of standard epoxies is not desirable. Apoxie® Clay has a working time of one hour with a setting time of two hours, accepts paint well, and cleans up with water.

Apoxie Clay® Instructions

1. Measure equal parts of A and B components. Mix and knead together two minutes or until thoroughly combined and a uniform color is achieved. Note: Incomplete mixing will give poor results .Apoxie® Clay is now ready to use. It's working time is approximately two to three hours.

   Smooth or texture with fingers or tools and water or Aves® Safety Solvent before set up. Paint wet or dry.

2. Clean up with Aves® Safety Solvent or soap and water.

3. Note: Curing time is 24 hours to be waterproof and for hard finishing.

4. Refrigerating or freezing will extend shelf life.

Caution:

Keep Out of Reach of Children

Wear protective gloves when mixing.

Wear goggles and dust mask when sanding and grinding. Seal containers when not in use.